Safety Warnings and PrecautionsQL-800 User Guide 151Caution• There are high voltage points inside the printer. To avoid a fire or electrical shock, neverattempt to disassemble or repair the printer.• Never insert or drop any metal objects into the printer when it is open. This could cause afire or serious electrical shock, or damage the printer. If something falls into the printeraccidentally, switch the printer off immediately, disconnect the power plug from the powersource, and call for service. If you continue to use the printer, this could cause a fire orserious electrical shock.• If the printer is dropped and damaged, switch the printer off immediately, disconnect thepower plug from the power source, and call for service. If you continue to use the printer,this could cause a fire or serious electrical shock.• To avoid a fire or electrical shock, never use flammable sprays around the printer.• Never remove the fixed covers from the printer. This could cause a serious electrical shock.Important• While the printer is printing, do not open any covers and do not remove the power plug.• Do not apply excessive force or strong shock to the printer. Doing so can result in amachine failure or impair printer quality. Be sure to open/close the covers slowly.Moving the PrinterWarning• Call the dealer for advice before you ship the printer a long distance or move the printer bycar or truck where it may be subjected to shock and vibration. Moving the printer withoutthe proper preparation could subject it to shocks and vibrations which could damage theprinter and cause a fire.Caution• Before moving the printer, use the appropriate procedures to drain ink from the printheador entire print system. See “Preparing for Moving” on page 73. See “Preparing for Shipping”on page 73.• Before you move the printer to another location in the same building, disconnect the powercord and make sure that all other cables are disconnected.
