Designing and Printing Labels58 QL-800 User GuidePrinting Labels1 Ensure the label media has been loaded.2 If you are printing from a third-party design application, ensure the printer driverpreferences are configured.3 Open the label file using the appropriate software. Then choose to print the label, and enterthe number of copies you would like to print.Note: If your software has a collate option, disable it before printing.4 Print the labels.5 Adjust the media exit guide as needed. The edge of the media should lightly contact theedge of the media exit guide.6 If necessary, you can pause, resume, and cancel print jobs from the operation panel on thefront of the printer. You can also perform a printhead cleaning operation while paused ifneeded.• While printing, press and release the pause/resume key to pause the print job.• While paused, press and release the pause/resume key to resume the print job.• While paused, press and hold the pause/resume key for approximately three secondsto cancel the print job.• While paused, press and hold the feed key to perform a light printhead cleaningoperation. Printhead cleaning options are also available in the QL-800 MaintenanceUtility.
