8-48 AccessoriesPause Adapter PS7Product DescriptionThe Pause Adapter allows an external control of the Pronto! 482/486/682/863.This external control can pause printing the labels by sending a pause signal.The printer finishes the current printed label and pauses the print job until thepause signal expires. When pause signal becomes inactive the printercontinues its job at the pause position.The external control could be realized by sensors in the peripheral devicewhich is connected to the Pause Adapter PS7. For example you can forwardthe media immediately after printing to an external device like a loop control.Connection is made between the Pause Adapter and the printer using theperipheral connector on the printer.The Pause Adapter is equipped with an interface to allow connection of theexternal control.The following signals are the most important signals which can be exchangedbetween the printer and the external system or device:1 Pause/ continue printing by sending an external pause signal2 You can send error messages to the printer if an error in the externalcontrol has occurred.3 An error message sent from the printer will indicate that a printer errorhas occurred4 A message sent from the printer informs that a print job has started
