Pronto! 482/486/682/863 6-13Removing and installing the locking systemRemoving the locking system1 Position printer at edge oftable so that the oblong hole isaccessible from below.2 Screw out screws (1) (2) andremove them.3 Remove the pinch roller (4)and bottom plate (3).Installing the locking system1 Position printer at edge oftable so that the oblong hole isaccessible from below.2 Place the pinch roller (4) intooblong hole and lightlytighten screw (1) of bottomplate (3) from above.3 Lightly tighten screw (2) ofbottom plate (3) from below.4 Align the pinch roller (4) withcenter of label and tightenscrews.1234
