Pronto! 482/486/682/863 12-9Device list1 Insert printable medium (labels, endless paper) which extends across theentire printing width.2 If the printout is to occur using thermal transfer printing, insert transferribbon with the maximum width.3 Press the menu button.4 Select Test > Device list menu.5 Start printout with the ↵ button.You can cancel the printout with the cancel button.The Device list function prints out the most importantinformation on hardware components of the printer andconnected devices. The printout occurs using the heat level andprint speed specified in the Setup > Print param. menu.Note: The printout occurs without taking the label gaps into consideration.This is why endless media are most suitable for this purpose.Device listPronto 486 - 10/09/2007 -15:14:17Firmware V3.11 (Aug 9 2007) - #111070553751Name DescriptionCPU Thor, #111070553751PCB-Rev. 7, CPU-Rev. 4TPH 300 dpi, 1248 dotsI/F1 Ethernet 10/100 MBit/sMAC: 00:02:E7:02:28:F4I/F2 USB 2.0 DeviceI/F3 RS-232IFFS 8MBUSB [1] Generic/Generic Hub[0] Full Rev. 3.00Mfr: 03EB,Class: 09/00,Protocol: 00, Phase: 20/0USB [2][1/1] Low #7-5037793,Rev. 1.05Mfr: 0985,Class: FF/00,Protocol: FF, Phase: 20/4USB [3] cab/Frontpanel[1/3] Full Rev. 2.05Mfr: 0985,Class: FF/1C,Protocol: 00, Phase: 20/1abc licensed under Artistic license from Yabasic 2.715 (www.yabasic.de)CMU-SNMP © 1988-89 Carnegie Mellon University,© 1995 Glenn WatersjTreeTable © 1997-1999 Sun Microsystems, Inc. All Rights ReservedPortions of this software are © 2005 The FreeType Project(www.freetype.org). All rights reserved.mDNSResponder © 2002-2006 Apple Computer Inc. All Rights ReservedLicensed under the Apache License, Version 2.0
