8-52 AccessoriesExplanation of the Signals• XPSE - PauseIf the pause signal XPSE becomes active the printer will finish the currentprinted label. Then the printer will pause the print job as long as thePin Signal Direction System Function1 XPSE Input Pause signal2 XFEH Input External error3 --- --- Do not use!4 --- --- Do not use!5 XEDG Output No existing print job6 XDNB Output Printer is not ready7 XEDST Output Print of a label has started8 GND Ground (0V)9 RXPSE (Input) Pause (reverse line)10 RXFEH (Input) External error (reverse line)11 --- --- Do not use!12 GND Ground (0V)13 --- --- Do not use!14 RÜL Output Reverse line (for all output signals)15 24P (Output) Operating voltage +24V, Si T 100mA