14-4 FTP printer managementFTP firmware updateTo carry out a firmware update, you must be logged on with the username“root” (see FTP logon on page 14-2).1 Ensure that the label printer is in “Ready” mode. See Status tab on page 5-15.2 Set the "binary" transfer mode in the FTP client.3 Open the "system" folder.4 Copy a valid firmware file (e.g. 303_6518.x2) to the "system" folder.FTP-Firmware-UPd appears in the display of the printer. The status of thesaving procedure is shown by a progress indicator in the display. Theprinter resets automatically after the update is carried out successfully.You can check whether the firmware update was carried out successfully onthe "Status" tab of the printer website.
