11Base StationThe phone may be connected to two line (RJ14C) wall jacks toaccommodate all two lines.1. Choose an area near an electrical outlet and a telephone wall jack(RJ11C), and place your cordless telephone on a level surface, such as adesktop or tabletop, or you may mount it on the wall.2. Plug the power supply cord into the power jack on the back of the baseand the other end into an electrical outlet.CAUTION: To reduce risk of personal injury, fire, or damage use onlythe 5-2757 (base) power adaptor listed in the user’s guide. This poweradaptor is intended to be correctly orientated in a vertical or floormount position.3. Connect the telephone line cords:If you have 2 single-line wall jacks installed in your home or office, youcan use adaptors/couplers (not included) to combine the 2 singletelephone lines into 1 dual lines. The adaptor/coupler may look similarto the one pictured here and can be purchased from your localtelephone products retailer.Connections & SetupLine 1Line 2Line 1Line 2Line 1 + 2Or, you can use the 2 single telephone lines plug into the 2 jacks onthe back of the telephone.If you have Line 1 and Line 2 wired into one wall jack in your home oroffice, you can use one of the supplied telephone line cords to connectfrom the wall jack to the Line 1 + 2 jack on the back of the phone asshown below.
