Dialing BackWhen reviewing CID records, you can dial back the numbers showing onthe display by pressing the Headset button, or the Talk button, or the Spkbutton or the Line 1 or Line 2 button.If You Programmed Your Local Area Code1. Use the CID button to display the number you want to dial.2. If you see a number with 7 digits (i.e. 555-1234), then the call wasreceived from within your area code. However, this does not guaranteethe call is a local call. If you see a number with 11 digits(i.e.1-234-555-1234), then the call received was not from your areacode.3. To adjust the phone number format, use the FORMAT soft key. Forinstance, a 7-digit local number sometimes cannot be dialed because itrequires a 10-digit or 11-digit format. Use the FORMAT soft key to scrollthrough 7, 10 and 11-digit numbers.Number of digits Explanation Example7-digits: 7-digit telephone number (i.e.555-5555)10-digits: 3-digit area code+7-digit telephone (i.e.425-555-5555)number11-digits: long distance code 1 (i.e. 1-425-555-5555)+3-digit area code+7-digit telephone number4. To dial the displayed number, select a Line or press Talk, Spk, or Headsetbutton.If You Did Not Program Your Local Area Code1. Use the CID button to display the number you want to dial. You willonly see 10-digit numbers (i.e. 234-555-1234).2. Press Talk, Spk, Headset button or select a Line to dial back. You mayadjust the number format by pressing the FORMAT soft key beforedialing.Call Waiting Caller IDThis feature allows you to see who is calling when you hear the call waitingbeep. The caller identification information appears in the display after youhear the tone.• Press the Flash button to put the person to whom you’re talking onhold and answer the incoming call.IMPORTANT: To use all the features of this unit, you must subscribe to eitherthe standard Name/Number Caller ID Service or Caller ID with Call WaitingService. To know who is calling while you are on the phone, you mustsubscribe to Caller ID with Call Waiting Service.Caller ID