RCA 25250 User Manual

Also see for 25250: User guide User guide Quick start guide

Contents

RCA 25250 User Manual Manual pdf 43 page image

Other InformationTroubleshooting GuideTelephone SolutionsNo dial tone• Check or repeat installation steps:Make sure the base power cord is connected to a working electricaloutlet. Make sure the telephone line cord is connected to the base andthe wall jack.• Connect another phone to the same jack. If it doesn’t work, theproblem might be your wiring or local service.• The handset may be out of range of the base. Move closer to the base.• Make sure the battery is properly charged (for 14 hours).Dial tone is ok, but can’t dial out• Make sure the type of phone service you are subscribed to is TONE orPULSE.Handset does not ring• Make sure the handset ringer is set to On.• The handset may be out of range of the base. Move closer to the base.• You may have too many extension phones on your line. Try unpluggingsome extensions.• Check for a dial tone. If no dial tone is heard, see “No dial tone”.You experience static, noise, or fading in and out• The handset may be out of range of the base. Move closer to base.• Make sure base is not plugged into an electrical outlet with anotherhousehold appliance. If necessary, relocate the base.• Charge the battery (for 14 hours).Memory dialing doesn’t work• Did you follow proper dialing sequence?Unit locks up and no communication between the base and cordlesshandset• Unplug the power adaptor from the electrical outlet and the bottom ofthe base. Remove the handset battery. Wait for 30 seconds and plug thepower adaptor back into the base and electrical outlet. Reconnect thebattery and charge for 14 hours.“Out of Range...” shows in the handset display• Move the handset closer to the base.• Make sure the base power cord is connected to a working electricaloutlet.Date/Time setting is restored to default setting• May be caused by power failure. Set Date/Time again.