RCA 25250 User Manual

Also see for 25250: User guide User guide Quick start guide

Contents

RCA 25250 User Manual Manual pdf 38 page image

Memo RecordYou can leave a message by pressing the Memo button on base or selectingmemo recording under handset menu.1. Press the Memo button on base or handset menu to enter memo recordmode.2. Use VOL (- or +) button to select Mailbox 1 or Mailbox 2 to save therecording.3. Press SELECT soft key to confirm. “Record memo after beep” shows inthe display.4. After the beep, begin speaking and “Recording” shows in the display.5. Press the FINISH soft key to end the recording.NOTE: The maximum duration allowed for memo is the same as the messagelength setting in the menu.Memo Recording (Only applicable for handset)From the Answer System Menu:1. Press the VOL (- or +) button to scroll to Memo recording.2. Use VOL (- or +) button to select Mailbox 1 or Mailbox 2 to save therecording.3. Press SELECT soft key to confirm. “Record memo after beep” shows inthe display.4. After the beep, begin speaking and “Recording” shows in the display.5. Press the FINISH soft key to end the recording.ICM/Memo PlaybackIn idle mode, press base Ans Sys button when flashing or press Play buttonon handset or on base. The unit enters the message playback mode, and thestatus of messages for each line display. Use left and right key can togglebetween Line 1 and Line 2, press SELECT soft key to play themessages.If the unit has new messages, only the new messages will be played,otherwise all messages will be played. Unit will play messages to the end.During each message playback, it shows the current message informationon the screen. If it is a ICM message, it shows the message’s CID,including Date/Time, Name and Number. If it is a memo, only Display memoand Date/Time.During each message playback, you can press the CID/Next button to skipto the current message OR press the DIR/Prev button to replay the message.Double press the DIR/Prev button to play the previous message.If there are no messages, the unit will announce “You have NO messages”.Answering System Operation