RCA J12H770 User Manual

Contents

21Chapter 5: Commercial Interface MenusChapter 5Commercial InterfaceOnCommercial InterfaceClone ManagementChannelOSDSourceVolumePower ManagementKey ManagementReset Commercial InterfaceMENU ExitENTER OK SelectFF GGGGGGGGGGGGGGGGGGPower ManagementCommercial InterfaceOffOffOffAuto Power OnAuto Power OffPower Always OnMENU BackSelectFF GGFF GGFF GGCommercial InterfaceOnCommercial InterfaceClone ManagementChannelOSDSourceVolumePower ManagementKey ManagementReset Commercial InterfaceMENU ExitENTER OK SelectFF GGGGGGGGGGGGGGGGGG- Key Lock : This setting disables the keys on the front of the TV.- RCU Type : This function assigns RCU type as TV1, TV2, TV3. This is used when more than 1 TV is beinginstalled in the same room.Note : The remote must be configured to send the matching RCU Type corresponding to this setting.This is done as follows : On the R130 K1 remote, press hold and <1> keys for 5 seconds to set itto “TV1”. Press and hold and <2> keys for 5 seconds to set it to “TV2”. Press and hold TEM> and <3> keys for 5 seconds to set it to “TV3”.Key ManagementCommercial InterfaceOnTV1Key LockIR(RCU) TypeMENU BackSelectFF GGFF GG- Auto Power On : This function sets the power state when AC power is applied to the TV.+ Off : TV will go to stanby mode+ On : TV will turn on+ Last : TV will resume the state it was in before AC power was removed.- Auto Power Off : This function assigns the amount of time an inactive TV will remain on. It can be used byyour facility to save energy.- Power Always On : TV can not be turned off.Commercial InterfaceOnCommercial InterfaceClone ManagementChannelOSDSourceVolumePower ManagementKey ManagementReset Commercial InterfaceMENU ExitENTER OK SelectFF GGGGGGGGGGGGGGGGGG- This function will reset all data in the commercial interface menu to the factory defaults.Reset Commercial ResetReset Commecial InterfaceOK Cancel