Connections & SetupChapter 1 15Time MenuThis control panel lets you control several time-related functions. Scrollto the feature you want to set. Use the right arrow button to change thesetting.Go Back Takes you to the previous menu.Time Config. Takes you to the Time Configuration menu.Go Back Takes you to the previous menu.Time Displays the current time if the master user has set the time. Ifallowed by the master user, the basic user can set the time. Press OKto toggle between am and pm.Set Time Access The master user selects who is able to set andchange the current time:Basic Basic users are able access the current timeinformation and can make changes.Disabled If the master user has set the time, the timeinformation is available but cannot be changed.Automatic Basic users are able to access the current timeinformation but cannot make changes. With this option, if themaster user doesn't set the time, the TV software will try toacquire time information from broadcasts that provide it.Time Offset Sets an offset (from +12 to -12 hours) from UniversalTime (UCT). The setting is in increments of 30 minutes. If you enterthe time manually, this option appears gray (disabled). Common USoffsets from UCT are:Eastern -5:00Central -6:00Mountain -7:00Pacific -8:00Alaska -9:00Hawaii -10:00Sleep Timer Lets you set the TV to turn off after a given time. Press theright arrow to add 15 minutes to the clock (up to four hours).Wake-Up Timer Lets the master user set availability to this timer On orOff.Note: When the ClonePRO remote is used via the TV’s DSCI (DigitalSerial Communications Interface) port to turn the TV on and off,Sleep Timer and Wake-Up Timer settings are nonfunctional.Schedule Lets you set the TV to turn on and off at specified times on aspecified channel--one time or daily.Go BackTime 08:25AMSet Time Access Disabled...Time Offset None....TIME CONFIGGo BackTime Config. ...Sleep Timer 00:00Wake-Up Timer ...Schedule ...TIME