RCA J24F635 User Manual

Also see for TRUFLAT J32F635: Specifications

RCA J24F635 User Manual Manual pdf 33 page image

Chapter 5 33Other InformationCloning a TVUse the ClonePRO or a master remote to complete any necessary setup steps to the TV, suchas Auto Channel Search, changing Access & Power options, etc. Go to Chapter 1 for moreinformation on setting up the TV. When you have finished setting up the TV, you can use it asyour example TV.1. Connect the ClonePRO to the example TV’s DSCI port.2. It is recommended, though not required, to turn on the TV. Press the POWER button.3. Press the LEARN button to begin the cloning process. When it is complete, CloningComplete is displayed on-screen.4. Take the ClonePRO to each subsequent TV and then (in either DSCI or IR mode) TEACHeach TV, monitoring the process on-screen.The settings learned by the ClonePRO remain indefinitely, ready to TEACH the next TV untiloverwritten by a new LEARN operation.General troubleshootingProblems with the DSCI mode• Make sure the TV is plugged into a live electrical outlet.• Make sure the ClonePRO is plugged into the TV’s DSCI port.• The connecting cable should have at least 6 wires, mapping 1-to-1 (not flipped).ClonePro remote isn't working• Check the battery. Place a new 9V battery in the unit if the battery is old.• Make sure the ClonePRO is pointed at the TV with a clear line of sight.• If you are trying to TEACH, make sure there is a valid memory stored in the ClonePRO(Check by going into DSCI-mode [Status].)