RCA PHD42600 User Manual

Also see for PHD42600: Specifications

RCA PHD42600 User Manual Manual pdf 22 page image

Using the Monitor’s Features20 Chapter 3Graphics contained within this publication are for representation only.VID1 Component is connected to the VID1 VIDEO In or S-VIDEO In jack.VID2 Component is connected to the VID2 VIDEO In or S-VIDEO In jack.CMP1 Component is connected to the COMPONENT 1 jacks (YPbPr).CMP2 Component is connected to the COMPONENT 2 jacks (YPbPr).RGB Component is connected to the RGB IN jacks.DVI Component is connected to the DVI IN jack.Zoom ModesMany DVD titles are “anamorphic” (widescreen). There are two predominant “anamorphic” (widescreen) aspect ratios:2.35:1 and 1.85:1. When 2.35:1 is displayed on this 16:9 widescreen monitor, there will be small black bars on the topand bottom of the screen. When a 1.85:1 content is displayed, the black bars on the top and bottom will be slimmerthan those of 2.35:1.This plasma monitor is capable of displaying a widescreen image on its native 16:9 aspect ratio. However, not allavailable broadcast or video contents fit perfectly on widescreen (16:9) format, resulting in unused screen space. Usethe following guidelines to determine the most suitable widescreen viewing mode.4:3 — 4:3 image is centered on the display, black bars are added to the extra space on the left and right16:9 — 4:3 image is proportionally stretched to fill the entire screen.Zoom 14:9 —Stretch 1.85:1 content to full screen, eliminating black bars on the sides.Zoom 16:9 — Stretch 2.35:1 content to full screen, eliminating the black bars on the sides.Zoom 16:9 Subtitle — Stretches and shifts the image up to facilitate display of subtitles.Cinerama — 4:3 image is expanded in the horizontal and vertical directions. The center of the picture is almost normalwhile the edges are expanded.Notes: When using the RGB and DVI inputs, the only available zoom options are 16:9 and 4:3.Cinerama is not available when using component video (Y Pb Pr).