Other Information28 Chapter 5Graphics contained within this publication are for representation only.Sound okay, picture poor• Try adjusting sharpness function to impr ove weak signals. Go to page 23 for mor einstructions.Picture is flickering• Try adjusting the clock phase function to r educe flickering. Go to page 26 for mor einstructions.The Remote Control Doesn’t Work• Maybe batteries in r emote ar e weak, dead, or installed incorr ectly . Put newbatteries in the r emote. (Note, if you r emove the batteries, you may have toreprogram the r emote to operate other components.)• Something might be between the r emote and the r emote sensor on the component.Make sur e ther e is a clear path.• Maybe the r emote isn’ t aimed dir ectly at the component (DVD, Monitor , VCR) thatyou’r e trying to operate.• Maybe r emote is not in monitor Mode. Pr ess the MONITOR button so r emote willcontr ol the monitor .• You might need to r eset the r emote: r emove batteries and pr ess the number 1button for at least 60 seconds. Release the 1 button, r eplace the batteries, and (ifnecessary) pr ogram the r emote again.Care and CleaningCAUTION: Turn OFF your monitor before cleaning.You can clean the unit as required, using a soft lint-free cloth. Be sure to occasionally dust theventilation slots in the cabinet to help assure adequate ventilation.The monitor’s screen may be cleaned with a soft, lint-free cloth as well. Take care notto scratch or mar the screen. If necessary, you may use a cloth dampened with warmwater. Never use strong cleaning agents, such as ammonia-based cleaners, or abrasivepowder. These types of cleaners will damage the monitor.While cleaning do not spray liquid directly on the screen, or allow liquid to run down thescreen and inside the unit. Also, never place drinks or vases with water on top of the unit. Thiscould increase the risk of fire or shock hazard or damage to the product.Caution: Using video games or any external accessory with fixed images for extended periods