RCA PHD42600 User Manual

Also see for PHD42600: Specifications

RCA PHD42600 User Manual Manual pdf 26 page image

Using the Menu System24 Chapter 4Graphics contained within this publication are for representation only.Picture Menu (when using DVI or RGB inputs)Pict. Preset Allows you to adjust the picture settings depending onthe lighting in your home. You can choose from Vibrant (brightlighting), Natural (normal lighting), Standard (soft lighting), andPersonal. Personal lets you adjust the settings to your personalpreference and save them as a default. Different settings can be savedfor each input.Brightness Adjusts the brightness of the picture.Contrast Adjusts the difference between the light and dark areas ofthe picture.Color Warmth Automatically adjusts the color temperature of thepicture. Press the right arrow to scroll through the color adjustments:Cool for a more blue palette of picture colors; Normal; and Warm fora more red palette of picture colors. The 6500D setting is used bytechnicians and is not recommended for normal use.High Contrast Adjusts the amount of light the picture emits for thedarkest areas of an image. Press OK to check the box.Zoom Mode Allows you to zoom the picture ratio using theseoptions: 4:3 and 16:9.Note: When using the RGB and DVI inputs, the only availablezoom options are 16:9 and 4:3.Pict. Geometry Allows you to set the picture geometry when usingDVI or RGB inputs. This menu is described in detail below.Reset Resets all picture settings to their original factory settings.Highlight Reset and press OK for 5 seconds to reset picture settings.Picture GeometryNear the bottom of the PICTURE menu for RGB or DVI inputs is thePict. Geometry menu choice, which allows you to adjust more specificsettings, such as horizontal and vertical size and position.Auto Size Automatically adjusts the picture to fit the screen for thechosen input.Vertical Position Adjusts the picture’s position upward or downward.Horizontal Size Adjusts the horizontal size of the picture.Horizontal Position Adjusts the picture’s position left or right.Reset Resets all picture settings to their original factory settings.Highlight Reset and press OK for 5 seconds to reset picture settings.The PICTURE menu when DVI or RGBvideo signal is being used.TipYou can also change the Zoom modes using ZOOM,CINEMA, and the arrow buttons.