RCA RCU1010RF User Manual

Also see for RCU1010RF: Quick start guide Quick start guide

Contents

RCA RCU1010RF User Manual Manual pdf 24 page image

24Delete an Event Timer5. The Timer 1 Key? Screen appears. Press and release the keyyou want to program to activate after a certain time delay.For example, to set your VCR to record, press and release theVCR component key in step 4, then the LCD RECORD key.6. The Set Hours? Screen appears. The hour (HH) digits areflashing. The day is not used for Event Timer settings. Pressand release the LCD UP or DOWN ARROW key to select thedesired hour. Press and release the LCD OK key.7. The minutes (MM) digits are now flashing. Press and releasethe LCD UP or DOWN ARROW key to select the minutes.Press and release the LCD OK key.8. Press and release the LCD OK key on the Confirm to Save?Screen to confirm and save.9. Once the first Event Timer is set, the LCD displays the Timer2 Mode? Screen for setting the next Event Timer. If you wantto set another Event Timer, repeat steps 4-8. If you do notwant to set any more Event Timers, press and release theLCD EXIT key.Note: A symbol (T) will be displayed to signify a Timer is set.The LCD touchscreen will remain on until the Timer expires.10. The Set an Event process is now complete. To exit the SetupMode, press and release the LCD EXIT key, followed by theLCD OK key on the Exit Setup Screen.Any set Event Timer is indicated by the symbol (T) displayed above the clock on yourLCD touchscreen. To delete an Event Timer, follow these steps:Note: If no Event Timer has been previously set, this optionis not shown in Setup Mode.1. Press and hold the SETUP key on the rubber keypad for2-3 seconds until the LED indicator light remains on and thetouchscreen shows the Delete a Timer? Screen.2. Press and release the LCD OK key.3. The Delete 1? Screen displays the current day and theprogrammed HH:MM Event Timer.4. The event number is displayed (1, 2, 3, or 4). Press and releasethe SETUP key repeatedly until the Event Timer you wish todelete is displayed.5. To delete this event, press and release the LCD OK key.To cancel this operation, press and release the SETUP keyrepeatedly until the Exit Setup Screen is displayed. Pressand release the LCD OK key.Set an Event Timer (continued)RCU_1010_RF_IB_RevA.qxd 9/24/03 10:31 AM Page 24