RCA RCU1010RF User Manual

Also see for RCU1010RF: Quick start guide Quick start guide

Contents

RCA RCU1010RF User Manual Manual pdf 9 page image

9During a Setup function, if no key is pressed for 60 seconds, the unit automatically exits from theSetup mode. The LED indicator light flashes an error in this instance, and the LCD displays theTimeOut Screen for three seconds. Any operation that is not completed when the timeout occursis not saved.General Setup Notes1. When in Setup Mode, pressing the LCD LEARN key automatically forwards to theLearn IR Mode? Screen.2. When in Setup Mode, pressing the LCD MACRO key automatically forwards to theSet SmartMacro? Screen.3. At any point in the Setup process, where a “save” is being made, the Confirm to Save? Screenis displayed. Press and release the LCD OK key to save, or press and release the LCD EXIT keyto exit without saving any changes.4. At any point in the Setup process, where an “overwrite” is being made (e.g., overwriting Macros,Learned Modes, etc.), the Confirm to Overwrite? Screen is displayed. Press and release theLCD OK key to confirm the change, or press and release the LCD EXIT key to exit withoutoverwriting any information.5. At any point in the Setup process, where a “deletion” is being made (e.g., deleting Macros,Timers, etc.), the Confirm to Delete? Screen is displayed. Press and release the LCD OK keyto confirm the deletion, or press and release the LCD EXIT key to exit without deletingany information.6. At any point in the Setup process, where a “change” is being made, the Success Screen displaysfor one second to confirm the action.7. Note: For all setup and operational functions, use the VCR key and VCR Mode to operate a PVR/DVR.Component Control ScreensComponent Control ScreensYour RCU1010RF displays a different control screen for each of the nine components. You can easilyswitch between these components by simply pressing the desired LCD component key.CodRCU_1010_RF_IB_RevA.qxd 9/24/03 10:30 AM Page 9