Rain Bird ESP-SMTe User Manual
                                  | |
Contents
| 
ESP-SMTe Controller24Step 4. Set Allowed Watering WindowsSet a time that irrigation can occur on Allowed WateringDays.A Set the start and end times for the 1st WateringWindow; then press NEXT.B If desired, Set the 2nd Watering Window to ON and setthe start and end times; then press NEXT.C Set the Daily Water Window for new plants and zonesthat may water every day regardless of allowedwatering days; then press NEXT.cb NOTE: The Daily Water Window allows irrigation ofnew plants every day, and is not affected by AllowedWatering Days, Blocked Days or Event Days Off. Thenumber of days that a Daily Water Window is in effectis set in the Enter Plant Maturity step under InputZone Information.D Set Rain Shutoff (days and inches); then press NEXT.cb NOTE: Once the desired amount of rain has beenexceeded, the controller will stop watering time basedand grow-in zones for the number of Full Days speci-fied. Full Days begin at midnight so 1 Full Day is therest of today and all of tomorrow.Step 5. ReviewReview the Configure Controller settings.A Press BACK to make changes if desired, then pressMORE.B Review settings.C Review settings and press DONE. |
Related manuals for Rain Bird ESP-SMTe
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine