16 DOMINION KSX USER M ANUALConnect to Dominion KSX RemotelyHaving completed the physical installation of Dominion KSX, you are now ready to establish aninitial network connection. Below are basic instructions for doing so. Please see Chapter 3:Raritan Remote Client for detailed instructions, being sure to review the “KVM SessionProperties” and “Color Calibration” sections to optimize your Dominion KSX performance forTarget KVM Servers.Launch Raritan Remote Client (RRC)1. Log into any Windows-based computer with network access to Dominion KSX.2. If you are using Windows NT, 2000, XP, or 2003, ensure that you are not a “restricted” user.3. Launch Microsoft Internet Explorer. Ensure that your Internet Explorer security settingsallow the download and execution of ActiveX controls.Note: The Windows default security setting, “Medium”, will suffice.4. In the text field found on the Internet Explorer “Address” bar, type in the IP address youassigned to Dominion KSX in Step 5 of the previous section, “Initial Configuration.” PressENTER to load and launch the web access client, called Raritan Remote Client.5. After launching Raritan Remote Client, you will see a tree list on the left-hand side of thescreen with a list of all automatically-detected Raritan devices found on your subnet. If youdo not find your Dominion KSX unit listed there by name, create one manually by selectingConnection → New Profile on the menu bar. See Chapter 3: Raritan Remote Client, RRCNavigator and Creating New Profiles for more information.6. Double-click on the entry corresponding to your Dominion KSX unit, found on the left-handside of Raritan Remote Client.