64 DOMINION KSX USER M ANUALA TTRIBUTE D ATAFILTER-ID Any FILTER-ID attributes returned by the RADIUS server duringauthentication will be sent in each accounting request.CLASS Any CLASS attributes returned by the RADIUS server duringauthentication will be sent in each accounting request.ACCT-AUTHENTICHow the user was authenticated. Either RADIUS (1) if the user wasauthenticated by the RADIUS server or LOCAL (2) if the user wasauthenticated by Dominion KSX’s built-in user name database.TERMINATE-CAUSEIf this is a STOP request, the reason the user was terminated. EitherUSER_REQUEST (1), LOST_SERVICE (3), SESSION_TIMEOUT (5),or ADMIN_RESET (6).Time and DateOn the Configuration Menu, select [T] Time and Date to view Current Date and Time on theDominion KSX unit. You must save changes and reboot Dominion KSX to apply changes toTime and Date.• New Date / New Time: Manually change to current date and time values.• Adjust for daylight savings time: Toggle between YES and NO to reflect whether yourcountry or state follows the daylight savings time procedure.• Get Time From SNTP Server: Indicates whether Dominion KSX time/date should beautomatically synchronized with the time/date of an external SNTP server.− Primary Server IP Address: IP address of first SNTP server to attempt timesynchronization.− Secondary Server IP Address: IP address of second SNTP server to query, if primaryserver is unavailable.− User standard UDP port 123: Allows user to modify UDP port used for SNTP timesynchronization. Consult your SNTP server administrator to determine if this valueshould be adjusted.• Time Zone: Select the time zone in which your Dominion KSX unit is physically located.