Appendix A: Specifications190Port DescriptionHTTP, Port 80 This port can be configured as needed. See HTTP and HTTPS PortSettings (on page 112). By default, all requests received by the KX II-101-V2 via HTTP (port 80) are automatically forwarded to HTTPS forcomplete security. The KX II-101-V2 responds to Port 80 for userconvenience, relieving users from having to explicitly type in the URLfield to access the KX II-101-V2, while still preserving completesecurity.HTTPS, Port 443 This port can be configured as needed. See HTTP and HTTPS PortSettings (on page 112). By default, this port is used for multiplepurposes, including the web server for the HTML client, the downloadof client software (MPC/VKC) onto the client's host, and the transfer ofKVM and virtual media data streams to the client.KX II-101-V2(Raritan KVM-over-IP) Protocol,Configurable Port5000This port is used to discover other Dominion devices and forcommunication between Raritan devices and systems, including CC-SG for devices that CC-SG management is available. By default, this isset to Port 5000, but you may configure it to use any TCP port notcurrently in use. For details on how to configure this setting, seeNetwork Settings (on page 106).SNTP (Time Server)on ConfigurableUDP Port 123The KX II-101-V2 offers the optional capability to synchronize itsinternal clock to a central time server. This function requires the use ofUDP Port 123 (the standard for SNTP), but can also be configured touse any port of your designation. OptionalLDAP/LDAPS onConfigurable Ports389 or 636If the KX II-101-V2 is configured to remotely authenticate user logonsvia the LDAP/LDAPS protocol, ports 389 or 636 will be used, but thesystem can also be configured to use any port of your designation.OptionalRADIUS onConfigurable Port1812If the KX II-101-V2 is configured to remotely authenticate user logonsvia the RADIUS protocol, either port 1812 will be used, but the systemcan also be configured to use any port of your designation. OptionalRADIUS Accountingon Configurable Port1813If the KX II-101-V2 is configured to remotely authenticate user logonsvia the RADIUS protocol, and also employs RADIUS accounting forevent logging, port 1813 or an additional port of your designation will beused to transfer log notifications.SYSLOG onConfigurable UDPPort 514If the KX II-101-V2 is configured to send messages to a Syslog server,then the indicated port(s) will be used for communication - uses UDPPort 514.SNMP Default UDPPortsPort 161 is used for inbound/outbound read/write SNMP access andport 162 is used for outbound traffic for SNMP traps. OptionalTCP Port 22 Port 22 is used for the KX II-101-V2 command line interface (when youare working with Raritan Technical Support).
