Appendix D: Informational Notes206HP UX RX 1600 Keyboard and Mouse ConfigurationIf you are using an HP® UX RX 1600 running UNIX®, do the following toconnect the device to the target: Verify you are using KX II-101-V2 firmware 2.0.20.5.6964 or higher. Use the USB cable that is supplied with the KX II-101-V2 . Set the Host Interface field on the Keyboard/Mouse Setup page toUSB. See Keyboard/Mouse Setup (on page 115). Verify that the Enable Absolute Mouse and Use Full Speedcheckboxes on the Port page are not selected. Use either Intelligent or Standard Mouse mode. Do not use AbsoluteMouse mode.Compaq Alpha and IBM P Server Mouse Mode LimitationWhen connecting to either Compaq® Alpha servers or IBM® P serversthrough the KX II-101-V2, you must use Single Mouse mode. SeeWorking with Target Servers (on page 35).Windows 2000 and Windows 2003 Server Keyboard LimitationsDue to an operating system limitation, the following keyboardcombinations do not work with a US-International keyboard layout whenusing the Windows 2000® operating system and Windows 2003® servers. Right Alt+D Right Alt+I Right Alt+LNote: Right Alt may be labeled as AltGr on keyboards that specificallyhave US/International markings on the keys.CC-SGProxy Mode and MPCIf you are using KX II in a CC-SG configuration, do not use the CC-SGproxy mode if you are planning to use the Multi-Platform Client (MPC).
