Chapter 3: KX III Administration174Note: If a port is already a part of blade server port group, anotherdual video port group, or 'standard' port group, the port is not anoption since ports can only belong to a single port group at a time.3. Select the Dual Video Port Group radio button.4. From the Select Ports for Group section, click on the port you aredesignating as the primary port, then click Add to add it to theSelected text box. Be sure to add the primary port first.Note: Ideally, the permissions applied to each port in the port groupshould be the same. If they are not, the permissions of the port withthe most restrictive permissions is applied to the port group. Forexample, if VM Access Deny is applied to one port and VM AccessRead-Write is applied to another port, VM Access Deny is applied tothe port group. See Permissions and Dual Video Port GroupAccess (on page 225) for information on how port permissions affectdual video port groups.5. Click on the port that you are designating as the secondary port andclick Add to add it to the Selected text box.6. Select the orientation of the page. The orientation you selectdepends on what works best with your monitor setup.7. Click OK to create the port group.Dual video port groups appear on the Port Access page as Dual Porttypes.The primary and secondary ports that are a part of the port groupappear on the Port Access page as Dual Port(P) and Dual Port(S),respectively. For example, if the CIM type is DCIM, "DCIM Dual Port(P)" is displayed.Note: Dual Video port targets attached to a tier device should only beconnected via the tier device, not through the tier base device.Changing the Default GUI Language SettingThe KX III GUI defaults to English, but also supports the followinglocalized languages: Japanese Simplified Chinese Traditional ChineseTo change the GUI language:1. Select Device Settings > Language. The Language Settings pageopens.
