Appendix F: Frequently Asked Questions408Question AnswerWhat should I do to prepare aserver for connection to DominionKX III?Set the mouse parameter options to provideusers with the best mouse synchronization andturn off screensavers and any powermanagement features that affect screendisplay.What about mousesynchronization?In the past, KVM-over-IP mousesynchronization was a frustrating experience.The Dominion KX III’s Absolute MouseSynchronization provides for a tightlysynchronized mouse without requiring servermouse setting changes on Windows andApple® Mac servers. For other servers, theIntelligent Mouse mode or the speedy, singlemouse mode can be used to avoid changingthe server mouse settings.What comes in the Dominion KX IIIbox?The following is included: (1) Dominion KX IIIunit, (2) Quick Setup Guide, (3) standard 19"rack mount brackets, (4) user manual CD-ROM, (6) localized AC line cord and (7)warranty certificate and other documentation.Blade ServersQuestion AnswerCan I connect blade servers to theDominion KX III?Yes. Dominion KX III supports popular bladeserver models from the leading blade servermanufacturers: HP®, IBM®, Dell® and Cisco®.Which blade servers aresupported?The following models are supported: DellPowerEdge® 1855, 1955 and M1000e; HPBladeSystem c3000 and c7000; IBMBladeCenter® H, E and S; and Cisco UCS B-Series.Which CIM should I use? It depends on the type of KVM ports on thespecific make and model of the blade serveryou are using. The following CIMs aresupported: DCIM-PS2, DCIM-USBG2, D2CIM-VUSB and D2CIM-DVUSB.Which types of access and controlare available?The Dominion KX III provides automated andsecure KVM access: (1) at the rack, (2)remotely over IP, (3) via CommandCenter and(4) by modem.
