Chapter 3: KX III Administration414Shut down the device and power on once again.The DCIM-SUSB performs a reset (power cycle).5Verify that the characters are correct.Step 7: Create and Install an SSL CertificateRaritan strongly recommends you install your own SSL Certificate ineach KX III device.This security best practice reduces the number of Java™ warningmessages, and avoids man-in-the-middle attacks.It also prevents future Java versions and browser versions from blockingaccess to your KX III device.For information creating and installing SSL certificates, see SSLCertificates (on page 187).Rack PDU (Power Strip) Outlet ControlOverviewThe KX III allows you to control Raritan PX and RPC series rack PDU(power strip) outlets connected to the KX III through a D2CIM-PWR.Once a PX or RPC series is setup and then attached to the KX III, therack PDU and its outlets can be controlled from the Powerstrip page inthe KX III interface. This page is accessed by clicking on the Powermenu at the top of the page.The Powerstrip page will display rack PDUs attached to the KX III forwhich the user has been granted appropriate port access permissions. Inthe case of tiered configurations, the Powerstrip page will display bothrack PDUs attached to the base and tiered KX IIIs, for which the userhas been granted appropriate port access permissions.Note: For information on setting up a PX, see the Raritan PX OnlineHelp.From the Powerstrip page, you are able to turn the outlets on and off, aswell as cycle their power. You are also able to view the following powerstrip and outlet information: Powerstrip Device Information: Name Model
