Appendix B: Accessing a Paragon II from the KX III341Paragon IIoperationmodeMode description Supported?port can be selected andcontrolled by more thanone user, but only oneuser has keyboard andmouse control at anyone time.Timeout, which is configuredon the Paragon II, is notsupported. Both users willhave concurrent keyboardand mouse control.The Paragon II uses Greento indicate ‘available’. Thiswill also be true if anotheruser is already accessingthe target.Public View While one user isaccessing a server orother device on aspecific channel port,other users can selectthat channel port andview the video outputfrom that device.However, only the firstuser will have keyboardand mouse control untilthey disconnect orswitch away.Not supported.This mode cannot be usedwhen connecting the CIM toa Paragon II and the KX III.The Paragon II uses Yellowto indicate it is in P-Viewmode.CIM Name Updates CIM names updated from Paragon II are stored and retrieved fromthe CIM memory location corresponding to the Paragon namingconvention. CIM names updated from the KX III are stored and retrieved from theCIM memory location corresponding to the KX III naming convention. CIM name updates do not propagate between the Paragon II and theKX III.Supported Connection Distances Between Paragon II and KX IIIWhen using KX III as the front end of a Paragon II system, you shouldrestrict the cable length (distance) for good video quality.Supported distance from the Paragon II user station to the target serveris 500 cable feet (152 m). Greater distances may result in videoperformance that may or may not be acceptable to you.Supported distance from KX III to the Paragon II user station is up to 150cable feet (45 m).
