Chapter 5: Virtual KVM Client (VKC) Help288Saving Audio SettingsAudio device settings are applied on a per KX III device basis.Once the audio devices settings are configured and saved on the KX III,the same settings are applied to it.For example, you can configure a Windows® audio device to us a stereo,16 bit, 44.1K format.When you connect to different targets and use that Windows audiodevice, the stereo, 16 bit, 44.1K format is applied to each target server.For both playback and recording devices, the device type, device format,and the buffer settings applied to the device are saved.See Connecting and Disconnecting from a Digital Audio Device (onpage 289) for information on connecting to and configuring an audiodevice, and Adjusting Capture and Playback Buffer Size (Audio Settings)for information on audio device buffer settings.If you are using the audio feature while running PC Share mode and VMShare mode so multiple users can access the same audio device on atarget at once, the audio device settings of the user who initiates thesession are applied to all users who join the session.So, when a user joins an audio session, the target machine settings areused. See Connecting to Multiple Targets from a Single RemoteClient (on page 288).Connecting to Multiple Targets from a Single Remote ClientConnect to audio on up to four (4) target servers at the same time from asingle, remote client.See Connecting and Disconnecting from a Digital Audio Device (onpage 289) for information on connecting to audio devices.A Speaker icon is displayed in the status bar at the bottom of theclient window. It is grayed out when no audio is being used. When theSpeaker icon and Microphone icon are displayed in the status bar,the session is being captured as it is streamed.Note: When an audio session is underway, be sure to keep the sessionactive or change the KX III's idle timeout time so the audio session doesnot time out.
