Chapter 5: Virtual KVM Client (VKC) Help275Configuring Port Scan Settings in VKC and AKCConfiguring port scan options in VKC and AKC applies to scanning fromthe KX III Remote Console.To configure port scan options for the Local Console, see ConfigureLocal Console Scan Settings (on page 326)Use the port scanning feature to search for selected targets, and displaythem in a slide show view, allowing you to monitor up to 32 targets atone time.You can connect to targets or focus on a specific target as needed.Scans can include standard targets, blade servers, tiered Dominiondevices, and KVM switch ports.Configure scan settings from either the Virtual KVM Client (VKC) orActive KVM Client (AKC).See Scanning Ports - Remote Console (on page 309)Use the Scan Settings tab to customize the scan interval and defaultdisplay options.Configure Port ScanTo set scan settings:1. Click Tools > Options. The Options dialog appears.2. Select the Scan Settings tab.3. In the "Display Interval (10-255 sec):" field, specify the number ofseconds you want the target that is in focus to display in the center ofthe Port Scan window.4. In the "Interval Between Ports (10 - 255 sec):" field, specify theinterval at which the device should pause between ports.5. In the Display section, change the default display options for thethumbnail size and split orientation of the Port Scan window.
