APPENDIX F: RSA ACE/SERVER CONFIGURATION 101Appendix F: RSA ACE/Server ConfigurationThis section provides guidelines for configuring the RSA ACE/Server 5.0 so that SecureID can be used as theauthentication mechanism. Users in an ACE server native database can log on to Dominion SX units installed in thenetwork using SecureID token authentication.It is assumed that RSA ACE/Server is running RADIUS services and able to authenticate users from its nativedatabase. This guide does not provide initial configuration procedures for the ACE server but assumes that theadministrator is familiar with the ACE server and has the ability to set up and configure the application. Guidelinesare provided to allow SecureID to be used with the Dominion SX units.These steps must be performed on the RADIUS server in order to use SecureID:1. Configure all the units (define them in the RADIUS server database)2. Establish profiles3. Configure users and associate profiles to eachPlease follow the steps below:1. Select Start → Programs → RSA ACE Server → Database Administration-Host Mode.Figure 97 Launching RSA Administration Application2. Select Agent Host → Add Agent Host from the main menu to launch the configuration menu.Figure 98 Add Agent Host Selection
