Raven CR Series Operation Manual
Also see for CR7: ManualInstallation manualQuick start guideOperation manualInstallation guide
                                                                         | |
Contents
| 
26OPERATION PLANNINGNOTE: Operation planning is only available on CR12.Operation planning is a method to define guidance lines (including tram lines) andheadland application regions for an operation on a field. A operation plan can beselected to use for any job in a field that has an operation plan association. Also,preconfigured guidance lines, headrows, and tramlines can be selected and appliedto numerous jobs within an existing field boundary.Operation planning consists of two parts:• Pre-planning allows the user to adjust field boundary and lines that are createdbased on the boundary.• Planning allows the user to create a plan for the field using the boundary modifiedin pre-planning or existing guidance lines, and application zones.To create a new operation plan:1. Select the desired field and press Next . The Field Management window willopen.2. Select Operations Planning.NOTE: If needed, select Scouting to create a field boundary to use foroperations planning. A screen similar to the run screen will open but willnot apply product. |
Related manuals for Raven CR7
manualsdatabase
Your AI-powered manual search engine