Raven CR Series Operation Manual
Also see for CR7: ManualInstallation manualQuick start guideOperation manualInstallation guide
                                                                         | |
Contents
| 
50MANUAL NETWORK CREATION1. Press Configure Networks at the bottom of the Network Settings screen.2. Enter a name for the network in the SSID field.3. Select the desired security level. If a secured network is selected, enter the desiredPassword.4. If desired, select Data Restriction to limit the amount of data that is transferred viathe network.5. If desired, select Auto-Connect to allow devices to automatically connect to thisnetwork.CREATING A PERSONAL HOTSPOTCreating a Personal Hotspot will allow other devices to connect to, and use, the CRXInternet source. To create a Personal Hotspot:1. Press Hotspot.2. Select the Enable Wi-Fi Hotspot checkbox. The SSID number displayed will the benetwork name. The Password is the password to connect to the network.SCREEN CAPTURENOTE: CRX will store the last ten screen captures. CRX will begin replacingstored screen shots after ten screens are captured. Refer to theExporting Screen shots section on page 51 to transfer screen shots to aUSB drive for viewing.There are two ways to capture screen shots:• Using Screen Capture Tool• Using the Power ButtonUSING SCREEN CAPTURE TOOL1. Press the Screen Capture icon on the bottom of the screen.2. To move files from the CRX to a USB stick, perform the steps in the ExportingScreen shots section on page 51. |
Related manuals for Raven CR7
manualsdatabase
Your AI-powered manual search engine