Raven CR Series Operation Manual
Also see for CR7: ManualInstallation manualQuick start guideOperation manualInstallation guide
                                                                         | |
Contents
| 
48LIGHTBARNOTE: Lightbar configuration will only be available on CR12 if an externallightbar is detected.1. To access the Lightbar Configuration settings, press Lightbar . TheLightbar Configuration window will open.2. The default setting for the lightbar is that it is enabled. To disable the light-bar,deselect the Enable checkbox.3. The default setting for the Reverse LED Indication is active. When disabled, LEDswill illuminate in the direction the operator needs to steer to get back on line.4. Enable the Use CrossTrack Error option to have the lights directly correlate to thedistance from the guidance line. This option is automatically enabled if steering isdetected and the option has not been manually changed by the user. The optionis disabled by default and the lights integrate both cross track and track angleerrors to give the user a more natural steering feedback response for manualsteering.5. The default setting for Path Deviation Sensitivity is Fine. To adjust the PathDeviation Sensitivity select the desired radial button. While adjusting thesensitivity, note that the light bar increments along the bottom indicates thedistance off line for each light. For example, with Fine selected the first red lightwill turn on when the implement is 4” (10 cm) off line, and the second light willturn on when the implement is 10” (26 cm) off line. After adjusting all the settingsfor the light-bar, press Accept .6. If an external lightbar is connected via the serial port, that option will display onthe Lightbar Settings page and be selected. If desired, deselect the externallightbar.NOTIFICATIONSPress the Notifications button to access the Notification History. To view moreinformation on a specific notification, press the notification. A notification windowwill open displaying the notification type, additional notification details, and howlong ago the notification occurred. After reviewing the notification, press Complete. When done viewing the notifications, press Accept . |
Related manuals for Raven CR7
manualsdatabase
Your AI-powered manual search engine