Raven CR Series Operation Manual
Also see for CR7: ManualInstallation manualQuick start guideOperation manualInstallation guide
                                                                         | |
Contents
| 
37FIGURE 18. Switchbox Configuration4. Enter the number of switches. This number can be no greater than the totalnumber of sections. If the number of switches is less than the number of sections,the sections are assigned to the switches proportionally. Any remaining switchesare assigned from the center out.5. If desired, select the Fence Row Nozzles checkbox to map the outside sections tothe outside switches. The remaining sections will be reassigned proportionally tothe remaining switches.SCOUT OBJECTSScouting objects allows the user to create or mark different areas of the field toindicate obstacles, low spots, or field boundaries. The following options are availablefor Scouting Objects:• Field Boundary• Do Not Apply Zone• Application Zone• Line• FlagsCREATING A FLAGFlags can be used to indicate large rocks or other obstacles that may be present inthe field but may not be visible with mature crops.1. Select Scout Object icon.2. Select the Add icon next to Scout Features.3. Enter the desired name. In this case, Enter Flag Name. |
Related manuals for Raven CR7
manualsdatabase
Your AI-powered manual search engine