Raven CR Series Operation Manual
Also see for CR7: ManualInstallation manualQuick start guideOperation manualInstallation guide
                                                                         | |
Contents
| 
38FIGURE 19. Create New Scout Feature4. Select the desired recording point for the flag. It can be either centered with theimplement, or on either side of the implement.5. Select Create Flag .CREATE A FIELD BOUNDARY, DO NOT APPLY ZONE, ORAPPLICATION ZONEField boundaries indicate the edges of a field.Do not apply zones indicate an area in the field where application is prohibited.Application zones indicate an area where product should always be applied. Theyare generally used inside a do not apply zone.1. Select Scout Object icon.2. Select the Add icon next to Scout Features.3. Select the desired task.4. Select the desired start recording point. It can be either centered with theimplement or on either side of the implement. If left or right is selected, there isthe option of offset the line from the center using Override Offset. Select OverrideOffset and enter the distance to Offset from Center. The recording point will nowbe the Offset from Center distance from the selected recording location (left orright). |
Related manuals for Raven CR7
manualsdatabase
Your AI-powered manual search engine