3.7 Device pairingPairing a RMK remote keypadYou can control your MFD with an RMK keypad.From the This display tab of the Settings menu: Homescreen > Settings > This display .1. Select Pair keypad.2. Follow the onscreen instructions to pair your keypad.Ensure you select the correct orientation for the keypad during the pairing process.3. Repeat steps 1 and 2 on each MFD you want to control from your keypad.Note:Please refer to the controls section of your keypad’s documentation for details on controllingMFDs using a keypad.Clear pairing (RMK)1. Select Clear pairings to unpair ALL RMK keypads currently paired with the MFD.Pairing with a Quantum Radar scannerYou can connect a Quantum Radar scanner to your MFD using Wi-Fi.Pre-requisites:• Ensure you have connected your Quantum Radar scanner in accordance with the instructionsprovided with the Radar scanner.• Ensure you know your Radar scanner’s SSID and passcode.1. Select Pair with Quantum from the This display tab: Homescreen > Settings > This display >Pair with Quantum.2. Follow the onscreen instructions to pair with your Quantum Radar.The pairing process may take several minutes to complete.28
