Available user interface languagesThe following languages are available:English (US) English (UK) Arabic Danish GermanGreek Spanish Finnish French IndonesianIcelandic Italian Japanese Korean LithuanianLatvian Dutch Norwegian Polish PortugueseRussian Swedish Turkish Vietnamese Chinese(Traditional)Chinese(Simplified)Boat detailsTo ensure correct operation and display of data you should set the Boat Details settings accordingto your requirements.Boat details can be accessed from the Settings menu: Homescreen > Settings > Boat DetailsOption DescriptionBoat /Icon: Selection determines the icon used to signify your vessel in the Chart app.Boat Name: Configures your system with your vessel’s name.Min safe height: Enter your vessel’s maximum unladen height from the waterline. To ensureadequate clearance, it is recommended that you add a safety margin tothis figure to allow for variation caused by vessel movements.Min safe width: Enter your vessel’s maximum width at its widest point. To ensure adequateclearance on both sides, it is recommended that you add a safety marginfor port and starboard to this figure to allow for variation caused by vesselmovements.Min safe depth: Enter your vessel’s maximum depth when fully laden. This is the depthfrom the waterline to the lowest point on the vessel’s keel. To ensureadequate clearance, it is recommended that you add a safety margin tothis figure to allow for variation caused by vessel movements.Num of engines: Select the number of engines on your vessel. When connected to acompatible system, your MFD can monitor engine data.Identify engines: Once you have selected the number of engines, select Identify enginesand follow the onscreen instructions to configure your engines. Mayrequire an extra hardware interface to enable engine data to be displayed.Num of Batteries: Configures your system with the number of batteries on your vessel.Fuel tanks: Configures your system with the number of fuel tanks on your vessel.Units of measureYou can select your preferred units for data readings from the Units tab of the Settings menu:Homescreen > Settings > Units.Measurement Units Measurement UnitsDistance units: • Nautical Miles• NM & m• Statute Miles• KilometersVolume units: • US Gallons• Imperial Gallons• LitersSpeed units: • Kts• MPH• KPHEconomy units: • Distance per Volume• Volume per Distance• Liters per 100 km38
