NMEA 0183 settings — Axiom ProNMEA 0183 devices can be connected to Axiom Pro MFDs using the NMEA 0183 wires on thesupplied Power/Video/NMEA 0183 cable..2 NMEA 0183 ports are available:• Port 1: Input and output, 4,800 or 38,400 baud rate.• Port 2: Input only, 4,800 or 38,400 baud rate.The baud rate for each input port must be specified in the NMEA set-up menu (Homescreen >Settings > Network > NMEA set-up ).Note:• For Port 1, both the input and output communicate at the same baud rate. For example, if youhave one NMEA 0183 device connected to Port 1 INPUT, and another NMEA 0183 deviceconnected to Port 1 OUTPUT, both NMEA devices must use the same baud rate.NMEA 0183 settingsThe following options are available from the NMEA Set-up menuMenu item Description OptionsNMEA Port 1 Baud rate selection. • 4,800• 38,400NMEA input port 2 Baud rate selection. • 4,800• 38,400Bridge heading Bridge heading data fromNMEA 0183 to NMEA 2000 /SeaTalkng ®• Yes• NoTransmission mode Switches between single-endedand differential transmission.• Single-ended• DifferentialIndividual outputs List of NMEA 0183 sentencesfor which the output can bedisabled.• Enabled• Disabled40
