AutoroutingAutorouting is available when using compatible cartography. Autorouting allows you to build a routeautomatically between a point on the chart and your vessel.You can select any point on the Chart and from the Chart context menu select Autoroute to here oryou can select Autoroute to from an existing waypoint’s context menu to create a route automaticallybetween your vessel and the chosen point.The created route is generated by comparing data available on your cartography against theminimum safe distances specified in the Boat details menu: (Homescreen > Settings > Boat details).Waypoints will not be placed in areas that conflict with your specified minimum safe distances.Caution symbols are used for waypoints that are near objects or restricted areas.Never follow a route before checking each route leg is safe for your vessel.Reviewing an automatically generated routeBefore following any route you must ensure that it is safe to do so.Upon Route completion:1. Range in on each route leg and waypoint that make up the Route.2. Check either side of the route leg and around the waypoint for any possible obstructions.Obstructions can be charted objects or restricted areas. Routes generated automatically shoulduse the caution waypoint symbol in areas where there are possible obstructions.3. Where obstructions exist move the necessary waypoints so that the waypoint and route leg isno longer obstructed.Importing a routeYou can import routes created in standard gpx format.1. Save your route to a memory card.2. Insert the memory card into your MFD.3. Select Import from card from the Import/export page: Homescreen > My data > Import/export> Import from card.4. Locate and select the gpx file that contains your Route.The Route will be imported to your MFD.68
