7.3 TracksTracks are used to record where you have been. Tracks are made up of track points that are createdat regular time or distance intervals. You can store up to 15 tracks on your MFD, each track cancontain up to 10,000 points.Tracks can be converted into Routes so that they can be followed.Creating a trackYou can record your vessel’s journey using Tracks.1. Select and hold on your vessel icon to display the vessel pop-over options.2. Select Start track.Your vessel’s journey will now be recorded.3. Select Stop track from the pop-over options when you have completed your track.4. Select Save to save the track or Delete to remove the track.You can also start a new track recording at anytime from the Chart menu: Menu > New > Start a newtrack. When using the Chart menu to start a track, if a track is already recording then it will be savedbefore the new track is started. Once a Track is saved it can be converted to a Route so that thesame passage may be followed again at a later date.Converting a track to a routeFrom the Track list: Menu > Waypoints, routes, tracks > Tracks.1. Select a track.2. Select Create route from track from the pop-over options.3. Select OK.Track managementTracks are managed using the Track list.The Track list can be accessed from the Homescreen and from the Chart app: Homescreen > Mydata > Tracks, or Chart app > Menu > Waypoints, routes, tracks > Tracks.If the Track list is accessed from the Chart app menu, then the selected track is displayed in aChart pane on the right of the screen.Waypoints, Routes and Tracks 71
