Raymarine ST70+ Installation Manual

Also see for ST70 Instrument: Installation guide Operating guide User reference guide User reference handbook Operating guide

Contents

Raymarine ST70+ Installation Manual Manual pdf 32 page image

22 ST70+ User Reference ManualSelect typeScroll to select the vessel type that most closely corresponds to your vessel.When you have chosen the vessel type, press OKto confirm the choice. The Time and Date valuesand the data Units considered most appropriate forthe Language and Vessel Type you chose, are thenautomatically applied to your ST70+ system and anautomatic check of system parameters is carriedout. On completion, a System configuration page ispresent all displays in the system.Setting display types and groupsYou must now:• Select the display you want to set up.• Set the display type for each display (Instrument or Pilot Controller).• Allocate each display to a group.• Set the sequence number of each display within the group.• Link at least one keypad to each group.To do this:1. With the System configuration page displayed,press OK to display the Configure this displaypage.For unassigned displays (e.g. at first switchon), the legends Group and Number are dis-played. If the selected display has alreadybeen set up, this shows the current group andnumber in the group for the selected display.2. Use the Select Display button as necessary, tomove the screen highlight to the display you want to set up, i. e. so it is the selecteddisplay.3. Press OK to display the Display type setuppage.4. Scroll to select either Instrument or Autopilot,as required.Note: From this point, you must use a keypad type appropriateto the display type you have selected.D11142-1Press OK to continueSystem configurationNow configure eachdisplay type, groupand order. Thenlink one or morekeypads to thatgroup.iD11143-1Press OK to configure this displayConfigure this displayGroupNumberSelect each display in turn. Press OK toconfigure. When all done, press MENU.iD11144-1Press OK to acceptDisplay typeAutopilotConfigure this display as an instrument orautopilot controller