6.2 a Series ControlsD12577-1312Descrip-tion Functions1 Touch-screenTouch the screen to operate functions,including all menu operations.2 Power • Press once to switch the unit ON.• Once powered on, press the Powerbutton again to open the shortcuts pagewhere you can adjust the brightness,perform a screen capture, accessPowersave mode or access the powercontrols of external devices.• Press and hold to switch the unit OFF.• If an integrated pilot is engaged, pressand hold to put the autopilot intoSTANDBY mode.3 Cardreader slotMicroSD card reader• a6x and a7x = 1 x MicroSD card slot• a9x and a12x = 2 x MicroSD card slots6.3 e7 / e7D ControlsD12179-12456731Description Functions1 Touch-screenyoucantouchthescreentooperatemanycommon functions, including all menuoperations.2 Menu Accesses menus. Press again to closemenus.3 UniControl Provides a joystick, rotary control andan OK push button for using menus andapplications.4 Back Press to return to a previous menu ordialog level.5 WPT / MOB • Press and release to access thewaypoint options. Press again to placea waypoint.• Press and hold to place a ManOverboard (MOB) marker at yourcurrent position.6 Power • Press once to switch the unit ON.• Once powered on, press the Powerbutton again to adjust the brightness,perform a screen capture, accessPowersave mode or access the powercontrols for external devices.• Press and hold to switch the unit OFF.• If an integrated pilot is engaged,press and hold put the autopilot intoSTANDBY mode.7 Card readerslotOpen the card door to insert or removea MicroSD card. There are 2 card slots(labelled 1 and 2), used for electroniccharts and archiving waypoint, route,track and settings data.Getting started 69
