Reer MOSAIC Master M1 Installation And Use Manual

Also see for MOSAIC Master M1: Installation and use Installation and use manual Installation and use Installation and use Installation and use

Contents

Reer MOSAIC Master M1 Installation And Use Manual Manual pdf 56 page image

MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC56 8540780 • 25th June 2012 • Rev.15englishPassword protectionThe MSD requests a password in order to upload and save the project.Î The password entered as default must be modified to avoid manipulation (level 2password) or so that the configuration loaded on Mosaic (level 1 password) is notvisible.Level 1 passwordAll operators using the M1 system must have a Level 1 PASSWORD.This password allows only to view the LOG file, composition of the system and MONITORin real time and upload operations.The first time the system is initialised the operator must use the password "" (ENTER key).Designers who know the level 2 password can enter a new level 1 password(alphanumerical, max 8 characters).Î Operators who know this password are enabled to upload (from M1 to PC), modifyor save the project.Level 2 passwordDesigners authorised to work on the creation of the project must know a Level 2PASSWORD. The first time the system is initialised the operator must use the password"SAFEPASS" (all capital letters).Designers who know the level 2 password can enter a new level 2 password(alphanumerical, max 8 characters).Î This password enables the project to be uploaded (from PC to M1), modified andsaved. In other words, it allows total control of the PC => MOSAIC system.Î When a new project is UPLOADED the level 2 password could be changed.Î Should you forget either of these passwords, please contact ReeR which will providean unlock file (when the unlock file is saved in the right directory the icon willappear on the toolbar). When the icon is activated, the password level 1 and level 2are restored to their original values. This password is only given to the designer andcan only be used once.Password ChangeTo activate the PASSWORD Change use icon , after connecting with Level 2 Password.A window appears (Figure 40) allowing the choice of the new password; insert the old andnew passwords in the appropriate fields (max 8 characters). Click OK.At the end of the operation disconnect to restart the system.If MCM is present the new password is also saved in it.Figure 40