Regency P36E-NG4 Owners & Installation Manual

Contents

Regency P36E-NG4 Owners & Installation Manual Manual pdf 59 page image

P36E-4 Zero Clearance Direct Vent Gas Fireplace 59REGENCY ® OPTIONSFULL SCREEN DOORS INSTALLATION2) Full Screen Door Frame Installationa) Before attaching the Full Screen Door Frame to the unit, loosen the3 x #8 Philips Head Screws located on the inside top of the outerframe of the appliance. And remove the center screw.Also loosen the #8 Philips Head Screw on the inner side of eachhinge bracket as shown below.1) Before beginning the installation, remove the Screen Doors from theFull Screen Door Frame by fully opening the doors and lifting up offof the hinges. See important note in step 7.Inside Topof OuterFrameHingeBracketInner HingeBracket Screwb) Slide the cut-outs in the Top and Bottom Flange of the Full ScreenDoor Frame under the screw heads which were loosened in step 2a.Once the Frame is in place, tighten screws to secure.Cut-OutsBottomFlangeBackside of FullScreen DoorFrame ShownCut-OutsTopFlangeInnerCut-OutsBottomFlangeNOTE: Should the finished wall protrude beyond the face of the unit,you can accommodate up to 1/2" depth.Simply push in the Full Screen Door Frame until it aligns againstthe finished wall. Secure Top Flange of Full Screen Door Frame asdescribed in step 2.For the Bottom Flange of the Full Screen Door Frame, push thebottom of the Frame until it aligns with the wall. Use the inner cut-outsto secure the base of the Frame using the 2 x Hex Head Drill PointScrews provided.Backside of Full ScreenDoor Frame Shown