Regency P48-2 Owners & Installation Manual

Also see for P48-2: Owners & installation manual

Contents

Regency® P48-2 Zero Clearance Direct Vent Gas Fireplace 27INSTALLATION5) Pull off the pilotcap to exposethe pilot orifice.6) Unscrew the pilot orifice with the allenkey and replace with the LP pilot orificein the kit and replace pilot cap.7) Remove burner orifice with a 1/2"wrench and discard. Use anotherwrench to hold on to the elbow behindthe orifice.Each Kit contains one LPGConversion Kit and one DCSparker Kit.LPG Conversion Kit Contains:Qty. Part # Description1 904-434 Burner Orifice #471 918-590 Decal "Converted toPropane"1 908-529 5/32" Allen Key1 910-037 LP Injector (Pilot Orifice)1 918-478 Instruction SheetDC Sparker Kit Contains:Qty. Part # Description1 820-475 Bracket DC Sparker1 820-476 Bracket DC Sparker1 904-153 Washer #8 External Star1 904-330 Nut 8-32 Hex2 904-531 Bushing Split Plastic0.500 in.1 904-543 Screw 8-32 x 3/4 PanHead2 904-553 Screw #8 x 1/2 Type "B",Black Oxide1 910-073 Spark GeneratorBattery Holder1 910-074 Spark GeneratorSwitch C/W Wire1 910-078 Battery Size AAEnergizer En911 910-199 Clip Wire Holder1 910-903 Wire Fan To Power CordGround 30 in.1 918-478 Instruction Sheet904-781 Velcro Hook, Black904-782 Velcro Hook, BlackDiagram 1:Remove the left screw and then slide theburner assembly away from the orifice andlift out.THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTERIF IN DOUBT DO NOT DO THIS CONVERSION !!8) Reinstall new burner orifice LP stamped#47 and tighten.9) Turn control knob to the “OFF” position.10) Remove the black protection cap byhand from the high-low knob (Fig.1).Fig. 11) Remove the louvers and trim kit. Re-move the front door.2) Remove the logs, embers.3) Remove the grate by lifting straight up.4) Remove the burner assembly by remov-ing the 1 Phillips head screw and thenslide the burner assembly away from theorifice and lift out.Installation of LPGConversion Kit:Burner OrificeCONVERSION KIT FROM NG TO LPG PART #372-969for P48-2 SIT 820 NOVA Gas Valve