51 52Using a Locking Clip4. Buckle Vehicle Belt5. Position Shoulder Belton ChildPull up on shoulder belt to tighten.The shoulder belt should laysnugly across the center of thechild’s shoulders and across thechest and not on their face orneck.To help position the shoulderbelt, you may need to secure theshoulder belt in one of the twoshoulder belt-positioning guidesbehind headrest pad.NOTE: Use the shoulder belt positioning guide only if necessaryto correctly position the shoulder belt on the child.Check periodically to ensure your child has not moved out ofposition and loosened the shoulder belt.You will rarely need to use a locking clip except in some oldervehicles. Built-in child restraint locking systems have been requiredin vehicles since 1996, and many vehicles had these features evenearlier. Review pages 29-30 and your vehicle owner’s manual todetermine if your vehicle belts require a locking clip.If you need a locking clip immediately, they are likely available at anauto dealership, an auto store, or where you purchased this childrestraint. You can also email us at consumer@djgusa.com or callus at 1-800-544-1108 for one.A locking clip will not fix all types of seat belt problems. You MUSThave a lap and shoulder belt to use a locking clip. Do not use thelocking clip when using this seat as a booster seat.For Rear Facing installation, follow Pages 38-40 Warnings andSteps 1-5 before starting locking clip installation.For Forward Facing installation, follow Pages 47-48 Warningsand Steps 1-4 before starting locking clip installation.1. Determine Locking Clip PositionGrasp both vehicle belts together justbehind the latch plate to mark theposition for locking clip.Unbuckle the belt.NOTE: If the latch plate ends up justat the belt path opening so youcannot grasp the vehicle belt at the latch plate, grasp the vehiclebelts on the opposite side of the child restraint, as close to thelatch plate as possible.2. Attach Locking ClipThread both portions of the vehiclebelt onto the locking clip, as closeto the latch plate as possible.continued on next page4358-6653 Grow and Go 3 in 1.indd 57-584358-6653 Grow and Go 3 in 1.indd 57-58 4/15/15 8:48 AM4/15/15 8:48 AM