Safety 1st Grow and Go Air Instructions Manual

Safety 1st Grow and Go Air Instructions Manual Manual pdf 28 page image

50Vehicle Belt InstallationWARNINGS: Do not use the loweranchor belt along with the vehicle lap orlap/shoulder belt. Secure lower anchorhooks to storage attachments as shownwhen installing with vehicle belts.Check vehicle belt before each use. Useonly if the belt can be tightened properlyand securely.Failure to follow these warnings can resultin serious injury or death.4. Loosely Attach TetherHook to Vehicle’sTether AnchorCheck vehicle owner’s manual forspecific location.495. Route Vehicle Lapor Lap/Shoulder BeltThrough Forward-Facing Belt PathReview pages 30-31 and your vehicleowner’s manual to determine whatkind of vehicle belts you have and howto lock a child restraint in place.Do not twist belt. Buckle vehiclebelt.Safety TipsMake sure harness and buckle fit your child correctly beforeinstalling the child restraint. See pages 3-5.Experts agree that children should remain rear facing as long aspossible. In this child restraint, your child can remain rear facing upto 40 lb (18 kg) and up to 40 in. (101.6 cm).1. Adjust Headrest toHighest Position andRemove Body Pillows2. Undo Fasteners on SeatPad and Pull Easy BeltAccess Panel Down3. Place Child RestraintForward Facing FlushAgainst Vehicle SeatBackPut the child restraint into position 1.NOTE: Do not use any reclinepositions except to make the childrestraint flush against the vehicleseat back. Vehicle seat back must beupright.6. Replace Easy AccessBelt PanelAttach seat pad fasteners. If youwould like, you may put the bodypillows back in seat.Adjust the headrest/harness to theproper height for your child. Seepage 5 for fit guidelines.continued on next page4358-6835 Grow and Go Air.indd 55-564358-6835 Grow and Go Air.indd 55-56 10/29/15 3:34 PM10/29/15 3:34 PM