53 54Lap and Shoulder Belt Installation1. Place Booster SeatForward Facing FlushAgainst Vehicle SeatBackPut the booster seat into position1.2. Place Child in BoosterSeatTops of child’s ears should beat the midpoint of the headrest,but never above the top of theheadrest.Adjust headrest if needed, seepage 8.3. Position Lap Belt onChildRoute the lap belt portion ofvehicle belt through the boosterbelt path as shown.The lap belt should lay snuglyacross the child’s upper thighs andnot on the stomach.4. Buckle Vehicle Belt5. Position Shoulder Belton ChildSlide the shoulder belt underbottom of the Easy Out HarnessHolder as shown.Pull up on shoulder belt to tighten.The shoulder belt should laysnugly across the center of thechild’s shoulder and across thechest and not on their face orneck.To help position the shoulderbelt, you may need to secure theshoulder belt in one of the twoshoulder belt-positioning guidesbehind headrest pad.NOTE: Use the shoulder beltpositioning guide only if necessaryto correctly position the shoulderbelt on the child.Check periodically to make sureyour child has not moved out ofposition and loosened the shoulderbelt.NOTE: Do not use any recline positions except to make thebooster seat flush against the vehicle seat back. Vehicle seatback must be upright.4358-6835 Grow and Go Air.indd 59-604358-6835 Grow and Go Air.indd 59-60 10/29/15 3:34 PM10/29/15 3:34 PM