English - 10Plug & Play FeatureWhen the television is initially powered on, several basic customer settings proceed automaticallyand subsequently.The following settings are available.If you accidentally select the wrong country for your TV, the characters on the screen may be wronglydisplayed.Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2)digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receiveDVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility withthe future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may notbe available in some countries.¯ The Screen Saver is activated if there is no remotecontrol key input for longer than 1 minute while Plug &Play is running.1 If the television is in standby mode, press the POWERbutton on the remote control. The message Valitsevalikkokieli, myymälädemo, kanavat ja kellonaika. isdisplayed.2 Press the ENTER button, Select the OSD Languagemenu is automatically displayed. Press the ENTERbutton.3 Select the appropriate language by pressing the ▲ or ▼button. Press the ENTER button to confirm your choice.The message Select ‘Home Use’ when installing thisTV in your home. is displayed.4 Press the ◄ or ► button to select Store Demo or HomeUse, then press the ENTER button.¯The default selection is Home Use.¯We recommend setting the TV to Home Use modefor the best picture in your home environment.¯Store Demo mode is only intended for use in retailenvironments.¯If the unit is accidentally set to Store Demo modeand you want to return to Home Use (Standard):Press the Volume button on the TV. When thevolume OSD is displayed, press and hold the MENUbutton on the TV for 5 seconds.¯Make sure that the antenna is connected to the TV.5 The Country menu is displayed. Press the ENTERbutton, then press the ▲ or ▼ button to select therequired country. Press the ENTER button.6 Press the ▲ or ▼ button to select the channel source tomemorize. Press the ENTER button to select Start.Digital & Analogue: Digital and Analogue channels.Digital: Digital channels.Analogue: Analogue channels.7 Press the ▲ or ▼ button to memorize the channels of theselected connection, then press the ENTER button.¯Air: Air antenna signal.Cable: Cable antenna signal.The channel search will start and end automatically.Press the ENTER button at any time to interrupt thememorization process.Continued...Plug & PlayValitse valikkokieli, myymälädemo, kanavat ja kellonaika.HyvaksyOKPlug & PlaySelect the OSD LanguageEnterMenu Language : EnglishMove▲NederlandsEnglishEesti▼Plug & PlaySelect the Antenna source to memorize.Digital & AnalogueDigitalAnalogueStartStartEnterMoveStartSkipPlug & PlaySelect 'Home Use' when installing this TV in your home.Home UseStore DemoMove EnterPlug & PlayAuto Store in progress.Digital Channels : 0Analogue Channels : -- 143MHzStopEnter Skip1%Plug & PlaySelect Country.Country : Finland ►EnterPlug & PlaySelect the Antenna source to memorize.CableAirStartStartEnter SkipMove
